- HOME
- WHO WE ARE
- THE ACADEMY
- COURSES
- GROUP I: OCCUPATIONAL SAFETY AND HEALTH TRAINING
- - GWO ART
- - GWO BST (Basic Safety Training) 4 modules
- - GWO BST WORKING AT HEIGHTS
- - GWO BST FIRE AWARENESS
- - GWO BST FIRST AID
- - GWO BST MANUAL HANDING
- - GWO JOINT COURSE WORKING AT HEIGHT & MANUAL HANDLING
- - GWO REFRESH BST 4 MODULES
- - (sp) GWO RECYCLING MODULE WORKS AT HEIGHTS
- - (sp) GWO FIRE EXTINGUISHING RECYCLING MODULE
- - (sp) GWO FIRST AID RECYCLING MODULE
- - (sp) GWO RECYCLING MODULE LOAD HANDLING
- - GWO REFRESH JOINT COURSE BST_WAH & MMC
- - (sp) COURSE AND ELEVATOR CERTIFICATE
- - GWO CONFINED SPACES
- - (sp) ELECTRICAL RISK COURSE
- - (sp) FIRE EXTINGUISHING COURSE
- - (sp) RISK PREVENTION COURSE IN WORK AT HEIGHT (6 HOURS)
- - (sp) FIRST AID COURSE
- - LOTO BASIC TRAINING (Lockout-tagout)
- - (sp) ENVIRONMENTAL AWARENESS COURSE FOR THE WIND SECTOR
- GROUP II BASIC TECHNICAL TRAINING
- GROUP III MAINTENANCE TECHNICAL TRAINING
- GROUP IV ADVANCED MECHANICAL-HYDRAULIC TRAINING
- - UTRA HYDRAULICS ACCUMULATORS (Up Tower Repair Activities)
- - UTRA PROPORCIONAL VALVE (Up Tower Repair Activities)
- - UTRA MAIN BEARING SEALS CHANGE (Up Tower Repair Activities)
- - UTRA CHANGE BLADE BEARINGS SEAL (Up Tower Repair Activities)
- - UTRA PITCH CYLINDERS SEALS (Up Tower Repair Activities)
- - UTRA Replacement of rotating union seals (Up Tower Repair Activities)
- - GEARBOX AND MAIN SHAFT INSPECTION
- - UTRA TRANSDUCTOR LINEA BALLUF (Up Tower Repair Activities)
- - UTC GEARBOX BEARING HIGH SPEED SHAFT ROTOR SIDE (Up Tower Correctives)
- - UTC HIGH SPEED SHAFT COMPLETE (Up Tower Correctives)
- - UTC INTERMEDIATE SPEED SHAFT BEARING GENERATOR SIDE (Up Tower Correctives)
- - UTC GENERATOR BEARINGS (Up Tower Correctives) (Up Tower Correctives)
- - UTC PITCH CYLINDER (Up Tower Correctives)
- GROUP I: OCCUPATIONAL SAFETY AND HEALTH TRAINING
- R + D + i
- NEWS
- CONTACT
Showing all 21 results
-
Duration: 6 hours.
Code: R0153Category: Group I LRP & Security Training
Participants: 6 people.Gets the skills to access to confined or bad access spaces.COURSE DETAILS
COURSE CODE: R0153
THEORETICAL TRAINING HOURS: 2 hours.
PRACTICAL TRAINING HOURS: 4 hours.
TOTAL DURATION HOURS: 6 hours.
NUMBER OF PARTICIPANTS: 6 people.
PRICE PER PARTICIPANT: 750€ -
Duration: 16 hours
Code: R0149Category: Group I LRP & Security Training
Participants: 6 people.Grants competition for use of safe and effective Firts Aid in a wind turbine efficiently and without risk of injury, according to the Standard GWO.COURSE DETAILS
COURSE CODE: R0149
THEORETICAL TRAINING HOURS: 11.25 hours
PRACTICAL TRAINING HOURS: 4.75 hours
TOTAL DURATION HOURS: 16 hours
NUMBER OF PARTICIPANTS: 6 people.
PRICE PER PARTICIPANT: The rate of this course depends on the method and impartation and the number of students attending.
SPECIAL PRICING FOR WHOLE GROUPS -
Duration: 4 hours
Code: R0151Category: Group I LRP & Security Training
Participants: 6 people.Grants competition to perform safely and efficiently handling a load, according to the Standard GWOCOURSE DETAILS
COURSE CODE: R0151
THEORETICAL TRAINING HOURS: 3 hours
PRACTICAL TRAINING HOURS: 1 hours
TOTAL DURATION HOURS: 4 hours
NUMBER OF PARTICIPANTS: 6 people.
PRICE PER PARTICIPANT: The rate of this course depends on the method and impartation and the number of students attending.
SPECIAL PRICING FOR WHOLE GROUPS -
Code: R0188Category: Group I LRP & Security Training
Participants: 6 people.This Training Standard can be developed in several modules focused on Nacelle-Basement Rescue, and Hub-Spiner-Inside Blade RescueCOURSE DETAILS
COURSE CODE: R0188
NUMBER OF PARTICIPANTS: 6 people.
PRICE PER PARTICIPANT: The rate of this course depends on the method and impartation and the number of students attending.
SPECIAL PRICING FOR WHOLE GROUPS -
Duration: 16 hours
Code: R0148Category: Group I LRP & Security Training
Participants: 6 people.The objective of this course is to provide participants knowledge and basic skills needed through theoretical and practical training for safe work at height and rescue at height in an environment of wind turbines, according to the module BST Course Working at Heights.COURSE DETAILS
COURSE CODE: R0148
THEORETICAL TRAINING HOURS: 6 hours
PRACTICAL TRAINING HOURS: 10 hours
TOTAL DURATION HOURS: 16 hours
NUMBER OF PARTICIPANTS: 6 people.
PRICE PER PARTICIPANT: The rate of this course depends on the method and impartation and the number of students attending.
SPECIAL PRICING FOR WHOLE GROUPS -
Duration: 3 hours.
Code: R0142
Categories: Group I Training in ORP and Safety
Dates: to consult.
Participants: up to 20 peopleIt grants the competence to be able to act effectively in the event of an outbreak of fire.COURSE DETAILS
COURSE CODE: R0142
HOURS THEORY: 1.5 hours.
PRACTICAL HOURS: 1.5 hours.
TOTAL LENGTH: Three hours.
MAXIMUM OF PARTICIPANTS: 20 people.
PRICE PER PARTICIPANT: 450 €. -
Duration: 6 hours.
Code: R0117
Categories: Group I Training in ORP and Safety
Dates: to consult.
Participants: up to 20 peopleIt grants the competence to be able to carry out work at height safely and efficiently.COURSE DETAILS
COURSE CODE: R0117
HOURS THEORY: 2 hours.
PRACTICAL HOURS: 4 hours.
TOTAL LENGTH: 6 hours.
MAXIMUM OF PARTICIPANTS: 20 people.
PRICE PER PARTICIPANT: 480 €. -
Duration: 4 hours.
Code: R0110
Categories: Group I Training in ORP and Safety
Dates: to consult.
Participants: up to 20 peopleIt grants the competence to be able to effectively attend to an injured person.COURSE DETAILS
COURSE CODE: R0110
HOURS THEORY: 2 hours.
PRACTICAL HOURS: 2 hours.
TOTAL LENGTH: 4 hours.
MAXIMUM OF PARTICIPANTS: 20 people.
PRICE PER PARTICIPANT: 450 €. -
Duration: consult
Code: R0163
Categories: Group I Training in ORP and Safety
Dates: to consult.
Participants: up to 20 peopleWith this course, workers will learn about the risks and consequences of work in the presence of electrical energy, as well as safe work techniques and procedures.COURSE DETAILS
COURSE CODE: R0163
HOURS THEORY: Three hours.
PRACTICE HOURS: 1 hour.
TOTAL LENGTH: 4 hours.
MAXIMUM OF PARTICIPANTS: 20 people.
PRICE PER PARTICIPANT: 450€. -
Duration: 16 hours.
Code: R0165
Categories: Group I Training in ORP and Safety
Dates: to consult.
Participants: up to 20 peopleThe objective of this course is to provide participants with the basic and necessary knowledge and skills through theoretical and practical training to carry out safe work at heights and rescue at height in a wind turbine environment, According to the Course module Work at Height BST.COURSE DETAILS
COURSE CODE: R0165
HOURS THEORY: 6 hours.
PRACTICE HOURS: 10 hours.
TOTAL LENGTH: 16 hours.
PRICE PER PARTICIPANT: The rate for this course will depend on the modality and delivery and the number of attendees. -
Duration: 2 hours.
Code: R0105
Categories: Group I Training in ORP and Safety
Dates: to consult.
Participants: up to 6 peopleIt grants the competence to be able to use the lifts installed in wind turbines safely.COURSE DETAILS
COURSE CODE: R0105
HOURS THEORY: 0.5 hours.
PRACTICAL HOURS: 1.5 hours.
TOTAL LENGTH: 2 hours.
MAXIMUM OF PARTICIPANTS: 20 people.
SIRGA ELEVATOR PRICE: 60 €.
ZIPPER SYSTEM ELEVATOR PRICE: 70 €. -
Duration: 40 hours
Code: R0152Category: Group I LRP & Security Training
Participants: 6 people.The objective of this course is to provide participants knowledge and basic skills needed through theoretical and practical training for safe work at wind turbines, according to the module BST Course Working at Heights, Fire awareness, First Aid and Manual HandlingCOURSE DETAILS
COURSE CODE: R0152
THEORETICAL TRAINING HOURS: 22 hours
PRACTICAL TRAINING HOURS: 18 hours
TOTAL DURATION HOURS: 40 hours
NUMBER OF PARTICIPANTS: 6 people.
PRICE PER PARTICIPANT: The rate of this course depends on the method and impartation and the number of students attending.
SPECIAL PRICING FOR WHOLE GROUPS -
Duration: 4 hours
Code: R0150Category: Group I LRP & Security Training
Participants: 6 people.Grants competition for use of safe and effective equipment firefighting in a wind turbine efficiently and without risk of injury, according to the Standard GWO.COURSE DETAILS
COURSE CODE: R0150
THEORETICAL TRAINING HOURS: 2.67 hours
PRACTICAL TRAINING HOURS: 1.33 hours
TOTAL DURATION HOURS: 4 hours
NUMBER OF PARTICIPANTS: 6 people.
PRICE PER PARTICIPANT: The rate of this course depends on the method and impartation and the number of students attending.
SPECIAL PRICING FOR WHOLE GROUPS -
Duration: 20 hours
Code: R0164Category: Group I LRP & Security Training
Participants: 6 people.The objective of this course is to provide participants knowledge and basic skills needed through theoretical and practical training for safe work at height and rescue at height in an environment of wind turbines, according to the module BST Working at Heights and Manual Handling modules.COURSE DETAILS
COURSE CODE: R0164
THEORETICAL TRAINING HOURS: 8 hours
PRACTICAL TRAINING HOURS: 12 hours
TOTAL DURATION HOURS: 20 hours
NUMBER OF PARTICIPANTS: 6 people.
PRICE PER PARTICIPANT: The rate of this course depends on the method and impartation and the number of students attending.
SPECIAL PRICING FOR WHOLE GROUPS -
Duration: consult
Code: R0157
Categories: Group I Training in ORP and Safety
Dates: to consult.Course price 1 to 6 participants: € 450Course price 7 to 12 participants: € 1000
Participants: up to 12 peopleThis course updates the worker in the knowledge and practices necessary for fire fighting.COURSE DETAILS
COURSE CODE: R0157
MAXIMUM OF PARTICIPANTS: 12 persons.
CLOSED OPTION PRICE: € 110 / student.
CLOSED OPTION PRICE: 1-6 participants € 450 TOTAL / 7-12 participants € 1,000 TOTAL -
Duration: consult
Code: R0158
Categories: Group I Training in ORP and Safety
Dates: to consult.Price: to consult.
Participants: up to 12 peopleThis course updates the worker in the knowledge and practices necessary for handling loads.COURSE DETAILS
COURSE CODE: R0158
MAXIMUM OF PARTICIPANTS: 12 persons.
CLOSED OPTION PRICE: € 105 / student.
CLOSED OPTION PRICE:- 1 student 440 €
- 2 students € 310
- 3 students € 210
- 4 students € 160
- 5 students € 125
- 6 students € 105
- 7 students € 100
- 8-9-10-11 students € 80
- 12 students € 75
-
Duration: consult
Code: R0156
Categories: Group I Training in ORP and Safety
Dates: to consult.Price: to consult.
Participants: up to 20 peopleThis course enables the worker to perform first aid, check vital signs, detect symptoms of serious injuries, correctly manage accidents and correctly perform cardiopulmonary resuscitation maneuvers. Demonstrate the correct use of external defibrillators (AEDs)COURSE DETAILS
COURSE CODE: R0156
HOURS THEORY: Three hours.
PRACTICE HOURS: 5 hours.
TOTAL LENGTH: 8 hours.
MAXIMUM OF PARTICIPANTS: 20 people.
PRICE PER PARTICIPANT: The rate for this course will depend on the modality and delivery and the number of attendees. -
Duration: consult
Code: R0155
Categories: Group I Training in ORP and Safety
Dates: to consult.
Participants: up to 20 peopleThis course trains the worker to know the risks of work at height, the PPE used and their previous checks. With this knowledge, workers will be able to carry out rescue and evacuations inside a wind turbine using existing devices.COURSE DETAILS
COURSE CODE: R0155
HOURS THEORY: Three hours.
PRACTICE HOURS: 5 hours.
TOTAL LENGTH: 8 hours.
MAXIMUM OF PARTICIPANTS: 20 people.
PRICE PER PARTICIPANT: The rate for this course will depend on the modality and delivery and the number of attendees. -
Duration: 0.5 days.
Code: R0178Category: Group I LRP & Security Training
Participants: 4 people.Training in all LOTO systems used in the wind turbine, the requirements and situations in which its use is mandatoryCOURSE DETAILS
COURSE CODE: R0178
THEORETICAL TRAINING HOURS: 0.3 days ..
PRACTICAL TRAINING HOURS: 0.3 days ..
TOTAL DURATION HOURS: 0.5 days.
NUMBER OF PARTICIPANTS: 6 people.
PRICE PER PARTICIPANT: 487,50€
PRICE PER PARTICIPANT WITH FULL CAPACITY: 365,63€. -
Duration: 24 hours
Code: R0159Category: Group I LRP & Security Training
Participants: 6 people.The objective of this course is to provide participants knowledge and basic skills needed through theoretical and practical training for safe work at wind turbines, according to the module BST Course Working at Heights, Fire awareness, First Aid and Manual Handling.COURSE DETAILS
COURSE CODE: R0159
THEORETICAL TRAINING HOURS: 3 hours
PRACTICAL TRAINING HOURS: 1 hours
TOTAL DURATION HOURS: 4 hours
NUMBER OF PARTICIPANTS: 6 people.
PRICE PER PARTICIPANT: The rate of this course depends on the method and impartation and the number of students attending.
SPECIAL PRICING FOR WHOLE GROUPS -
Duration: 12 hours
Code: R0185Category: Group I LRP & Security Training
Participants: 6 people.The objective of this course is to provide participants knowledge and basic skills needed through theoretical and practical training for safe work at height and rescue at height in an environment of wind turbines, according to the Refresh modules BST Working at Heights and Manual Handling modules.COURSE DETAILS
COURSE CODE: R0185
THEORETICAL TRAINING HOURS: 6 hours
PRACTICAL TRAINING HOURS: 6 hours
TOTAL DURATION HOURS: 12 hours
NUMBER OF PARTICIPANTS: 6 people.
PRICE PER PARTICIPANT: The rate of this course depends on the method and impartation and the number of students attending.
SPECIAL PRICING FOR WHOLE GROUPS