Showing all 41 results

• 

  Groups41 Products
• Add to basket

  Duration: 6 hours.
  Code: R0153

  Category: Group I  LRP & Security Training
  

  Participants: 6 people.

  Gets the skills to access to confined or bad access spaces.

  COURSE DETAILS

  COURSE CODE: R0153
  THEORETICAL TRAINING HOURS: 2 hours.
  PRACTICAL TRAINING HOURS: 4 hours.
  TOTAL DURATION HOURS: 6 hours.
  NUMBER OF PARTICIPANTS: 6 people.
  PRICE PER PARTICIPANT: 750€

   

  CONFINED SPACES

  750,00€ Add to basket
• Add to basket

  Duration: 16 hours
  Code: R0149

  Category: Group I  LRP & Security Training
  

  Participants: 6 people.

  Grants competition for use of safe and effective Firts Aid in a wind turbine efficiently and without risk of injury, according to the Standard GWO.

  COURSE DETAILS

  COURSE CODE: R0149
  THEORETICAL TRAINING HOURS: 11,25 hours
  PRACTICAL TRAINING HOURS: 4,75 hours
  TOTAL DURATION HOURS: 16 hours
  NUMBER OF PARTICIPANTS: 6 people.
  PRICE PER PARTICIPANT: The rate of this course depends on the method and impartation and the number of students attending.
  SPECIAL PRICING FOR WHOLE GROUPS

   

  GWO COURSE FIRST AID

  0,00€ Add to basket
• Add to basket

  Duration: 4 hours
  Code: R0151

  Category: Group I  LRP & Security Training
  

  Participants: 6 people.

   Grants competition to perform safely and efficiently handling a load, according to the Standard GWO

  COURSE DETAILS

  COURSE CODE: R0151
  THEORETICAL TRAINING HOURS: 3 hours
  PRACTICAL TRAINING HOURS: 1 hours
  TOTAL DURATION HOURS: 4 hours
  NUMBER OF PARTICIPANTS: 6 people.
  PRICE PER PARTICIPANT: The rate of this course depends on the method and impartation and the number of students attending.
  SPECIAL PRICING FOR WHOLE GROUPS

   

  COURSE MANUAL HANDLING

  0,00€ Add to basket
• Add to basket

  Code: R0188

  Category: Group I  LRP & Security Training
  

  Participants: 6 people.

   This Training Standard can be developed in several modules focused on Nacelle-Basement Rescue, and Hub-Spiner-Inside Blade Rescue

  COURSE DETAILS

  COURSE CODE: R0188
  NUMBER OF PARTICIPANTS: 6 people.
  PRICE PER PARTICIPANT: The rate of this course depends on the method and impartation and the number of students attending.
  SPECIAL PRICING FOR WHOLE GROUPS

   

  GWO ART

  0,00€ Add to basket
• Add to basket

  Duration: 16 hours
  Code: R0148

  Category: Group I  LRP & Security Training
  

  Participants: 6 people.

  The objective of this course is to provide participants knowledge and basic skills needed through theoretical and practical training for safe work at height and rescue at height in an environment of wind turbines, according to the module BST Course Working at Heights.

  COURSE DETAILS

  COURSE CODE: R0148
  THEORETICAL TRAINING HOURS: 6 hours
  PRACTICAL TRAINING HOURS: 10 hours
  TOTAL DURATION HOURS: 16 hours
  NUMBER OF PARTICIPANTS: 6 people.
  PRICE PER PARTICIPANT: The rate of this course depends on the method and impartation and the number of students attending.
  SPECIAL PRICING FOR WHOLE GROUPS

   

  COURSE WORKING AT HEIGHT

  900,00€ Add to basket
• Add to basket

  Duración: 3 horas.
  Código: R0142
  Categorías: Grupo I Formación en PRL y Seguridad
  Fechas: a consultar.
  Participantes: hasta 20 personas

  Otorga la competencia para poder actuar eficazmente ante un conato de incendio.

  DETALLES DEL CURSO

  CÓDIGO DE CURSO: R0142
  HORAS TEORÍA: 1,5 horas.
  HORAS PRÁCTICAS: 1,5 horas.
  DURACIÓN TOTAL: 3 horas.
  MÁXIMO DE PARTICIPANTES: 20 personas.
  PRECIO POR PARTICIPANTE: 450 €.

  CURSO DE EXTINCIÓN DE INCENDIOS

  450,00€ Add to basket
• Add to basket

  Duración: 6 horas.
  Código: R0117
  Categorías: Grupo I Formación en PRL y Seguridad
  Fechas: a consultar.
  Participantes: hasta 20 personas

  Otorga la competencia para poder realizar de forma segura y eficaz trabajos en altura.

  DETALLES DEL CURSO

  CÓDIGO DE CURSO: R0117
  HORAS TEORÍA: 2 horas.
  HORAS PRÁCTICAS: 4 horas.
  DURACIÓN TOTAL:  6 horas.
  MÁXIMO DE PARTICIPANTES: 20 personas.
  PRECIO POR PARTICIPANTE: 480 €.

  CURSO DE PREVENCIÓN DE RIESGOS EN TRABAJOS EN ALTURA (6 HORAS)

  480,00€ Add to basket
• Add to basket

  Duración: 4 horas.
  Código: R0110
  Categorías: Grupo I Formación en PRL y Seguridad
  Fechas: a consultar.
  Participantes: hasta 20 personas

  Otorga la competencia para poder atender eficazmente a un accidentado.

  DETALLES DEL CURSO

  CÓDIGO DE CURSO: R0110
  HORAS TEORÍA: 2 horas.
  HORAS PRÁCTICAS: 2 horas.
  DURACIÓN TOTAL: 4 horas.
  MÁXIMO DE PARTICIPANTES: 20 personas.
  PRECIO POR PARTICIPANTE: 450 €.

   

  CURSO DE PRIMEROS AUXILIOS

  450,00€ Add to basket
• Add to basket

  Duración: consultar
  Código: R0163
  Categorías: Grupo I Formación en PRL y Seguridad
  Fechas: a consultar.
  Participantes: hasta 20 personas

  Con este curso los trabajadores conocerán los riesgos y consecuencias de los trabajos en presencia de energía eléctrica, así como las técnicas y procedimientos de trabajo seguro.

  DETALLES DEL CURSO

  CÓDIGO DE CURSO: R0163
  HORAS TEORÍA: 3 horas.
  HORAS PRÁCTICA: 1 horas.
  DURACIÓN TOTAL: 4 horas.
  MÁXIMO DE PARTICIPANTES: 20 personas.
  PRECIO POR PARTICIPANTE: 450€.

   

  CURSO DE RIESGO ELÉCTRICO

  450,00€ Add to basket
• Add to basket

  Duración: 16 horas.
  Código: R0165
  Categorías: Grupo I Formación en PRL y Seguridad
  Fechas: a consultar.
  Participantes: hasta 20 personas

  El objetivo de este curso es dotar a los participantes de los conocimientos y habilidades básicas y necesarias a través de la formación teórica y práctica para realizar un trabajo seguro en alturas y rescate en altura en un entorno de aerogeneradores, De acuerdo con el módulo del Curso BST de Trabajo en Altura.

  DETALLES DEL CURSO

  CÓDIGO DE CURSO: R0165
  HORAS TEORÍA: 6 horas.
  HORAS PRÁCTICA: 10 horas.
  DURACIÓN TOTAL: 16 horas.
  PRECIO POR PARTICIPANTE: La Tarifa de este curso dependerá de la modalidad e impartición y del número de asistentes.

   

  CURSO DE SENSIBILIZACIÓN MEDIOAMBIENTAL PARA EL SECTOR EÓLICO

  900,00€ Add to basket
• Add to basket

  Duración: 2 horas.
  Código: R0105
  Categorías: Grupo I Formación en PRL y Seguridad
  Fechas: a consultar.
  Participantes: hasta 6 personas

  Otorga la competencia para poder utilizar de forma segura los elevadores instalados en aerogeneradores.

  DETALLES DEL CURSO

  CÓDIGO DE CURSO: R0105
  HORAS TEORÍA: 0,5 horas.
  HORAS PRÁCTICAS: 1,5 horas.
  DURACIÓN TOTAL: 2 horas.
  MÁXIMO DE PARTICIPANTES: 20 personas.
  PRECIO ELEVADOR DE SIRGA: 60 €.
  PRECIO ELEVADOR DE SISTEMA DE CREMALLERA: 70 €.

   

  CURSO Y CERTIFICADO ELEVADOR

  70,00€ Add to basket
• Add to basket

  Duration: 5 days.
  Code: R0171

  Category: Group III: Maintenance Technical Training Middle Grade

  Participants: 4 people.

  In this course, participants will be able to locate all kinds of electrical and electronic faults. Learning the operation logic of a wind turbine and by monitoring the electrical diagrams, being able to detect and replace the components that present breakdowns (previously caused).

  COURSE DETAILS

  COURSE CODE: R0171
  THEORETICAL TRAINING HOURS: 1 day.
  PRACTICAL TRAINING HOURS: 4 days.
  TOTAL DURATION HOURS: 5 days.
  NUMBER OF PARTICIPANTS: 4 people.
  PRICE PER PARTICIPANT: 7800€.
  SPECIAL PRICING FOR WHOLE GROUPS

   

  ELECTRICAL AND ELECTRONICAL TROUBLE SHOOTING ALARMS

  4.875,00€ Add to basket
• Add to basket

  Duration: 40 hours
  Code: R0152

  Category: Group I  LRP & Security Training
  

  Participants: 6 people.

  The objective of this course is to provide participants knowledge and basic skills needed through theoretical and practical training for safe work at wind turbines, according to the module BST Course Working at Heights,Fire awareness, First Aid and Manual Handling

  COURSE DETAILS

  COURSE CODE: R0152
  THEORETICAL TRAINING HOURS: 22 hours
  PRACTICAL TRAINING HOURS: 18 hours
  TOTAL DURATION HOURS: 40 hours
  NUMBER OF PARTICIPANTS: 6 people.
  PRICE PER PARTICIPANT: The rate of this course depends on the method and impartation and the number of students attending.
  SPECIAL PRICING FOR WHOLE GROUPS

   

  GWO BST (Basic Safety Training) 4 MODULES

  0,00€ Add to basket
• Add to basket

  Duration: 2 hours.
  Code: R0179

  Category: Group IV Advanced Mechanical-Hydraulic Training
  

  Participants: 4 people.

  Repair of hydraulic system accumulators.

  COURSE DETAILS

  COURSE CODE: R0179
  THEORETICAL TRAINING HOURS: 0,5 hours.
  PRACTICAL TRAINING HOURS: 1,5 hours.
  TOTAL DURATION HOURS: 2 hours.
  NUMBER OF PARTICIPANTS: 4 people.
  PRICE PER PARTICIPANT: 1462,50€
  SPECIAL PRICING FOR WHOLE GROUPS

   

  UTRA Hydraulics acumulators (Up Tower Repair Activities)

  1.462,50€ Add to basket
• Add to basket

  Duration: 1  hours.
  Code: R0181

  Category: Group IV Advanced Mechanical-Hydraulic Training
  

  Participants: 4 people.

  Proportional valve cleaning and verification.

  COURSE DETAILS

  COURSE CODE: R0181
  THEORETICAL TRAINING HOURS: 0,5 hours.
  PRACTICAL TRAINING HOURS: 0,5 hours.
  TOTAL DURATION HOURS: 1 hour.
  NUMBER OF PARTICIPANTS: 4 people.
  PRICE PER PARTICIPANT: 975€
  SPECIAL PRICING FOR WHOLE GROUPS

   

  UTRA PROPORCIONAL VALVE (UP TOWER REPAIR ACTIVITIES)

  975,00€ Add to basket
• Add to basket

  Duration: 33 hours
  Code: R0187
  Category: Grupo II Formación Técnica Básica

  Price: a consultar.
  Participants: hasta 20 personas

  This training standard is composed of 3 modules Hydraulic, Electrical and Mechanical.
  This BTT Training shall enable Delegates to be able to perform basic hydraulic, mechanical and electrical tasks under the supervision of an experienced technician.

  TODOS LOS CURSOS

  COURSE DETAILS

  COURSE CODE: R0187
  THEORETICAL TRAINING HOURS: 24 hours.
  PRACTICAL TRAINING HOURS: 9 hours.
  TOTAL DURATION HOURS: 33 hours.
  NUMBER OF PARTICIPANTS: 4 people.
  PRICE PER PARTICIPANT: The rate of this course depends on the method and impartation and the number of students attending.
  SPECIAL PRICING FOR WHOLE GROUPS

  GWO BTT (Basic Technical Training) 3 MODULES

  0,00€ Add to basket
• Add to basket

  Duration: 1  hours.
  Code: R0184

  Category: Group IV Advanced Mechanical-Hydraulic Training
  

  Participants: 6 people.

  Verification and replacement of main bearings seals.

  COURSE DETAILS

  COURSE CODE: R0184
  THEORETICAL TRAINING HOURS: 0,5 hours.
  PRACTICAL TRAINING HOURS: 0,5 hours.
  TOTAL DURATION HOURS: 1 hour.
  NUMBER OF PARTICIPANTS: 4 people.
  PRICE PER PARTICIPANT: 975€
  SPECIAL PRICING FOR WHOLE GROUPS

   

  UTRA Main bearing seals change (Up Tower Repair Activities)

  975,00€ Add to basket
• Add to basket

  Duration: 1  hours.
  Code: R0183

  Category: Group IV Advanced Mechanical-Hydraulic Training
  

  Participants: 4 people.

  Verification and replacement of blade bearings seals

  COURSE DETAILS

  COURSE CODE: R0183
  THEORETICAL TRAINING HOURS: 0,5 hours.
  PRACTICAL TRAINING HOURS: 0,5 hours.
  TOTAL DURATION HOURS: 1 hour.
  NUMBER OF PARTICIPANTS: 4 people.
  PRICE PER PARTICIPANT: 975€
  SPECIAL PRICING FOR WHOLE GROUPS

   

  UTRA CHANGE BLADE BEARINGS SEAL (UP TOWER REPAIR ACTIVITIES)

  975,00€ Add to basket
• Add to basket

  Duration: 2 days.
  Code: R0180

  Category: Group IV Advanced Mechanical-Hydraulic Training
  

  Participants: 4 people.

  Repair of hydraulic pitch cylinders on hub.

  COURSE DETAILS

  COURSE CODE: R0180
  THEORETICAL TRAINING HOURS: 0,5 days..
  PRACTICAL TRAINING HOURS: 1,5 days.
  TOTAL DURATION HOURS: 2 days.
  NUMBER OF PARTICIPANTS: 4 people.
  PRICE PER PARTICIPANT: 1950€
  SPECIAL PRICING FOR WHOLE GROUPS

   

  UTRA PITCH CYLINDERS SEALS (UP TOWER REPAIR ACTIVITIES)

  1.950,00€ Add to basket
• Add to basket

  Duration: 1 day.
  Code: R0184

  Category: Group IV Advanced Mechanical-Hydraulic Training
  

  Participants: 6 people.

  Checking and replacing hydraulic rotary joint seals

  COURSE DETAILS

  COURSE CODE: R0184
  THEORETICAL TRAINING HOURS: 0,5 days..
  PRACTICAL TRAINING HOURS: 0,5 days.
  TOTAL DURATION HOURS: 1 days.
  NUMBER OF PARTICIPANTS: 4 people.
  PRICE PER PARTICIPANT: 975€

   

  UTRA Replacement of rotating union seals (Up Tower Repair Activities)

  975,00€ Add to basket
• Add to basket

  Duration: 2  hours.
  Code: R0172

  Category: Group IV Advanced Mechanical-Hydraulic Training
  

  Participants: 4 people.

  In this course, participants will be able to perform the complete inspection of the gearbox and the main shaft. Learning the use and handling of video endoscope for inspection. Learning to identify the damage on gears and bearings, as well as their interpretation and categorization based on their typology and severity.

  COURSE DETAILS

  COURSE CODE: R0172
  THEORETICAL TRAINING HOURS: 2 days.
  PRACTICAL TRAINING HOURS: 3 days.
  TOTAL DURATION HOURS: 5 days.
  NUMBER OF PARTICIPANTS: 4 people.
  PRICE PER PARTICIPANT: 5200€
  SPECIAL PRICING FOR WHOLE GROUPS

   

  GEARBOX AND MAIN SHAFT INSPECTION

  5.200,00€ Add to basket
• Add to basket

  Duration: 10 hours.
  Code: R0166

  Category: Group II Basic Technical Training

  Participants: 4 people.

  Grants competition for use of safe and effective the electrical works in a wind turbine efficiently and without risk of injury, according to the Standard GWO.

  COURSE DETAILS

  COURSE CODE: R0166
  THEORETICAL TRAINING HOURS: 8 hours.
  PRACTICAL TRAINING HOURS: 2 hours.
  TOTAL DURATION HOURS: 10 hours.
  NUMBER OF PARTICIPANTS: 4 people.
  PRICE PER PARTICIPANT: The rate of this course depends on the method and impartation and the number of students attending.
  SPECIAL PRICING FOR WHOLE GROUPS

   

  GWO BTT ELECTRICAL MODULE

  0,00€ Add to basket
• Add to basket

  Duration: 1 day.
  Code: R0182

  Category: Group IV Advanced Mechanical-Hydraulic Training
  

  Participants: 6 people.

  Verification and readjustment of Balluf linear transducer in pitch cylinder.

  COURSE DETAILS

  COURSE CODE: R0182
  THEORETICAL TRAINING HOURS: 0,5 days.
  PRACTICAL TRAINING HOURS: 0,5 days.
  TOTAL DURATION HOURS: 1 day..
  NUMBER OF PARTICIPANTS: 6 people.
  PRICE PER PARTICIPANT: 975€
  SPECIAL PRICING FOR WHOLE GROUPS

   

  UTRA TRANSDUCTOR LINEA BALLUF (UP TOWER REPAIR ACTIVITIES)

  975,00€ Add to basket
• Add to basket

  Duration: 9 hours.
  Code: R0168

  Category: Group II Basic Technical Training

  Participants: 4 people.

  Grants competition for use of safe and effective the hidraulic works in a wind turbine efficiently and without risk of injury, according to the Standard GWO

  COURSE DETAILS

  COURSE CODE: R0168
  THEORETICAL TRAINING HOURS: 6 hours.
  PRACTICAL TRAINING HOURS: 3 hours.
  TOTAL DURATION HOURS: 9 hours.
  NUMBER OF PARTICIPANTS: 4 people.
  PRICE PER PARTICIPANT: The rate of this course depends on the method and impartation and the number of students attending.
  SPECIAL PRICING FOR WHOLE GROUPS

   

  GWO BTT HIDRAULICAL MODULE

  0,00€ Add to basket
• Add to basket

  Duration: 10 hours.
  Code: R0167

  Category: Group II Basic Technical Training

  Participants: 4 people.

  Grants competition for use of safe and effective the mecanic works in a wind turbine efficiently and without risk of injury, according to the Standard GWO

  COURSE DETAILS

  COURSE CODE: R0167
  THEORETICAL TRAINING HOURS: 10 hours.
  PRACTICAL TRAINING HOURS: 4 hours.
  TOTAL DURATION HOURS: 14 hours.
  NUMBER OF PARTICIPANTS: 4 people.
  PRICE PER PARTICIPANT: The rate of this course depends on the method and impartation and the number of students attending.
  SPECIAL PRICING FOR WHOLE GROUPS

   

  GWO BTT MECHANICAL MODULE

  0,00€ Add to basket
• Add to basket

  Duration: 4 hours
  Code: R0150

  Category: Group I  LRP & Security Training
  

  Participants: 6 people.

  Grants competition for use of safe and effective equipment firefighting in a wind turbine efficiently and without risk of injury, according to the Standard GWO.

  COURSE DETAILS

  COURSE CODE: R0150
  THEORETICAL TRAINING HOURS: 2,67 hours
  PRACTICAL TRAINING HOURS: 1,33  hours
  TOTAL DURATION HOURS: 4 hours
  NUMBER OF PARTICIPANTS: 6 people.
  PRICE PER PARTICIPANT: The rate of this course depends on the method and impartation and the number of students attending.
  SPECIAL PRICING FOR WHOLE GROUPS

   

  GWO FIRE AWARENESS

  0,00€ Add to basket
• Add to basket

  Duration: 20 hours
  Code: R0164

  Category: Group I  LRP & Security Training
  

  Participants: 6 people.

  The objective of this course is to provide participants knowledge and basic skills needed through theoretical and practical training for safe work at height and rescue at height in an environment of wind turbines, according to the module BST Working at Heights and Manual Handling modules.

  COURSE DETAILS

  COURSE CODE: R0164
  THEORETICAL TRAINING HOURS: 8 hours
  PRACTICAL TRAINING HOURS: 12 hours
  TOTAL DURATION HOURS: 20 hours
  NUMBER OF PARTICIPANTS: 6 people.
  PRICE PER PARTICIPANT: The rate of this course depends on the method and impartation and the number of students attending.
  SPECIAL PRICING FOR WHOLE GROUPS

   

  GWO JOINT COURSE BST WORKING AT HEIGHT MODULE MANUAL HANDLING MODULE

  900,00€ Add to basket
• Add to basket

  Duración: consultar
  Código: R0157
  Categorías: Grupo I Formación en PRL y Seguridad
  Fechas: a consultar.

  Precio curso  1 a 6 participantes: 450 €

  Precio curso 7 a 12 participantes: 1000 €
  Participantes: hasta 12 personas

  Este curso actualiza al trabajador en los conocimientos y prácticas necesarios para la extinción de incendios.

  DETALLES DEL CURSO

  CÓDIGO DE CURSO: R0157
  MÁXIMO DE PARTICIPANTES: 12 personas.
  PRECIO OPCIÓN CERRADA: 110€/alumno.
  PRECIO OPCIÓN CERRADA: 1‐6 participantes 450€ TOTAL / 7‐12 participantes 1.000€ TOTAL

  GWO MÓDULO RECICLAJE EXTINCIÓN DE INCENDIOS

  450,00€ Add to basket
• Add to basket

  Duración: consultar
  Código: R0158
  Categorías: Grupo I Formación en PRL y Seguridad
  Fechas: a consultar.

  Precio: a consultar.
  Participantes: hasta 12 personas

  Este curso actualiza al trabajador en los conocimientos y prácticas necesarios para la manipulación de cargas.

  DETALLES DEL CURSO

  CÓDIGO DE CURSO: R0158
  MÁXIMO DE PARTICIPANTES: 12 personas.
  PRECIO OPCIÓN CERRADA: 105€/alumno.
  PRECIO OPCIÓN CERRADA: 

  • 1 alumno  440 €
  • 2 alumnos 310 €
  • 3 alumnos 210 €
  • 4 alumnos 160 €
  • 5 alumnos 125 €
  • 6 alumnos 105 €
  • 7 alumnos 100 €
  • 8-9-10-11 alumnos 80 €
  • 12 alumnos 75 €

  GWO MÓDULO RECICLAJE MANIPULACION DE CARGAS

  0,00€ Add to basket
• Add to basket

  Duración: consultar
  Código: R0156
  Categorías: Grupo I Formación en PRL y Seguridad
  Fechas: a consultar.

  Precio: a consultar.
  Participantes: hasta 20 personas

  Este curso capacita al trabajador para realizar los primeros auxilios, comprobar las constantes vitales, detectar los síntomas de lesiones graves, gestionar de forma correcta los accidentes y realizar correctamente las maniobras de reanimación cardio pulmonar. Demostrar el uso correcto de los desfibriladores externos (DEA)

  DETALLES DEL CURSO

  CÓDIGO DE CURSO: R0156
  HORAS TEORÍA: 3 horas.
  HORAS PRÁCTICA: 5 horas.
  DURACIÓN TOTAL: 8 horas.
  MÁXIMO DE PARTICIPANTES: 20 personas.
  PRECIO POR PARTICIPANTE: La Tarifa de este curso dependerá de la modalidad e impartición y del número de asistentes.

   

  GWO MÓDULO RECICLAJE PRIMEROS AUXILIOS

  0,00€ Add to basket
• Read more

  Duración: consultar
  Código: R0155
  Categorías: Grupo I Formación en PRL y Seguridad
  Fechas: a consultar.
  Participantes: hasta 20 personas

  Este curso capacita al trabajador para conocer los riesgos de los trabajos en altura, los EPI´s utilizados y sus comprobaciones previas. Con estos conocimientos, los trabajadores serán capaces de realizar los rescate y evacuaciones en el interior de un aerogenerador utilizando los dispositivos existentes.

  DETALLES DEL CURSO

  CÓDIGO DE CURSO: R0155
  HORAS TEORÍA: 3 horas.
  HORAS PRÁCTICA: 5 horas.
  DURACIÓN TOTAL: 8 horas.
  MÁXIMO DE PARTICIPANTES: 20 personas.
  PRECIO POR PARTICIPANTE: La Tarifa de este curso dependerá de la modalidad e impartición y del número de asistentes.

   

  GWO MÓDULO RECICLAJE TRABAJOS EN ALTURAS

  Read more
• Add to basket

  Duration: 0,5 days.
  Code: R0178

  Category: Group I  LRP & Security Training
  

  Participants: 4 people.

  Training in all LOTO systems used in the wind turbine, the requirements and situations in which its use is mandatory

  COURSE DETAILS

  COURSE CODE: R0178
  THEORETICAL TRAINING HOURS: 0,3 days..
  PRACTICAL TRAINING HOURS: 0,3 days..
  TOTAL DURATION HOURS: 0,5 days.
  NUMBER OF PARTICIPANTS: 6 people.
  PRICE PER PARTICIPANT: 487,50€
  PRICE PER PARTICIPANT WITH FULL CAPACITY: 365,63€.

   

  LOTO Basic Training (Lockout-Tagout)

  487,50€ Add to basket
• Add to basket

  Duration: 8 days.
  Code: R0169
  Category: Group II Basic Technical Training
  Participants: 4 people

  In this course, participants will learn how to perform maintenance work.
  They will be carried out separately by main elements, prior theoretical explanation they will perform maintenance in a practical way.

  COURSE DETAILS

  COURSE CODE: R0169
  THEORETICAL TRAINING HOURS: 4 days.
  PRACTICAL TRAINING HOURS: 4 days.
  TOTAL DURATION HOURS: 8 días.
  NUMBER OF PARTICIPANTS: 4 people.
  PRICE PER PARTICIPANT: 7800€.
  SPECIAL PRICING FOR WHOLE GROUPS

   

  PREVENTIVE MAINTENANCE ON WIND TURBINE

  7.800,00€ Add to basket
• Read more

  Duration: 24 hours
  Code: R0159

  Category: Group I  LRP & Security Training
  

  Participants: 6 people.

  The objective of this course is to provide participants knowledge and basic skills needed through theoretical and practical training for safe work at wind turbines, according to the module BST Course Working at Heights,Fire awareness, First Aid and Manual Handling.

  COURSE DETAILS

  COURSE CODE: R0159
  THEORETICAL TRAINING HOURS: 3 hours
  PRACTICAL TRAINING HOURS: 1 hours
  TOTAL DURATION HOURS: 4 hours
  NUMBER OF PARTICIPANTS: 6 people.
  PRICE PER PARTICIPANT: The rate of this course depends on the method and impartation and the number of students attending.
  SPECIAL PRICING FOR WHOLE GROUPS

   

  REFRESH BST FULL COURSE

  Read more
• Add to basket

  Duration: 12 hours
  Code: R0185

  Category: Group I  LRP & Security Training
  

  Participants: 6 people.

  The objective of this course is to provide participants knowledge and basic skills needed through theoretical and practical training for safe work at height and rescue at height in an environment of wind turbines, according to the Refresh modules BST Working at Heights and Manual Handling modules.

  COURSE DETAILS

  COURSE CODE: R0185
  THEORETICAL TRAINING HOURS: 6 hours
  PRACTICAL TRAINING HOURS: 6 hours
  TOTAL DURATION HOURS: 12 hours
  NUMBER OF PARTICIPANTS: 6 people.
  PRICE PER PARTICIPANT: The rate of this course depends on the method and impartation and the number of students attending.
  SPECIAL PRICING FOR WHOLE GROUPS

   

  REFRESH JOINT COURSE_BST WORKING AT HEIGHT MODULE MANUAL HANDLING

  900,00€ Add to basket
• Add to basket

  Duration: 8 days.
  Code: R0170

  Category: Group III: Maintenance Technical Training Middle Grade

  Participants: 4 people.

  In this course, participants will perform the most common small corrective operations, which involves replacing damaged components. For these operations, the work instructions, work risk assessments, the necessary tools and special tools, as well as all the necessary PPE will be detailed, realizing the operations in the nacelle.

  COURSE DETAILS

  COURSE CODE: R0170
  THEORETICAL TRAINING HOURS: 1 day.
  PRACTICAL TRAINING HOURS: 7 days.
  TOTAL DURATION HOURS: 8 days.
  NUMBER OF PARTICIPANTS: 4 people.
  PRICE PER PARTICIPANT: 7800€.
  SPECIAL PRICING FOR WHOLE GROUPS

   

  SMALL CORRECTIVES ACTIONS

  7.800,00€ Add to basket
• Add to basket

  Duration: 2 days.
  Code: R0175

  Category: Group IV Advanced Mechanical-Hydraulic Training
  

  Participants: 4 people.

  Performing the replacement of the gearbox hisgh speed shaft rotor side bearings on turbine.

  COURSE DETAILS

  COURSE CODE: R0175
  THEORETICAL TRAINING HOURS: 0,5 days..
  PRACTICAL TRAINING HOURS: 1,5 days.
  TOTAL DURATION HOURS: 2 days.
  NUMBER OF PARTICIPANTS: 4 people.
  PRICE PER PARTICIPANT: 1950€
  SPECIAL PRICING FOR WHOLE GROUPS

   

  UTC GEARBOX BEARING HIGH SPEED SHAFT ROTOR SIDE (UP TOWER CORRECTIVES)

  1.950,00€ Add to basket
• Add to basket

  Duration: 3 days.
  Code: R0176

  Category: Group IV Advanced Mechanical-Hydraulic Training
  

  Participants: 4 people.

  Performing the replacement of the gearbox high speed shaft complete, including the set of bearings on the shaft.

  COURSE DETAILS

  COURSE CODE: R0176
  THEORETICAL TRAINING HOURS: 0,5 days..
  PRACTICAL TRAINING HOURS: 2,5 days.
  TOTAL DURATION HOURS: 3 days.
  NUMBER OF PARTICIPANTS: 4 people.
  PRICE PER PARTICIPANT: 3035€
  SPECIAL PRICING FOR WHOLE GROUPS

   

  UTC HIGH SPEED SHAFT COMPLETE (UP TOWER CORRECTIVES)

  3.035,00€ Add to basket
• Add to basket

  Duration: 3 days.
  Code: R0177

  Category: Group IV Advanced Mechanical-Hydraulic Training
  

  Participants: 4 people.

  PPerforming the replacement of the gearbox intermediate speed shaft generator side bearings on turbine.

  COURSE DETAILS

  COURSE CODE: R0177
  THEORETICAL TRAINING HOURS: 0,5 days..
  PRACTICAL TRAINING HOURS: 2,5 days.
  TOTAL DURATION HOURS: 3 days.
  NUMBER OF PARTICIPANTS: 4 people.
  PRICE PER PARTICIPANT: 3035€
  SPECIAL PRICING FOR WHOLE GROUPS

   

  UTC INTERMEDIATE SPEED SHAFT BEARING GENERATOR SIDE (UP TOWER CORRECTIVES)

  1.950,00€ Add to basket
• Add to basket

  Duration: 3 days.
  Code: R0174

  Category: Group IV Advanced Mechanical-Hydraulic Training
  

  Participants: 4 people.

  Performing the replacement of the generator bearings on turbine, coupling and oposite coupling sides.

  COURSE DETAILS

  COURSE CODE: R0174
  THEORETICAL TRAINING HOURS: 0,5 days..
  PRACTICAL TRAINING HOURS: 2,5 days.
  TOTAL DURATION HOURS: 3 days.
  NUMBER OF PARTICIPANTS: 4 people.
  PRICE PER PARTICIPANT: 3035€
  SPECIAL PRICING FOR WHOLE GROUPS

   

  UTC GENERATOR BEARINGS (UP TOWER CORRECTIVES)

  3.035,00€ Add to basket
• Add to basket

  Duration: 2 days.
  Code: R0173

  Category: Group IV Advanced Mechanical-Hydraulic Training
  

  Participants: 4 people.

  Performing the replacement of picth cylinders.

  COURSE DETAILS

  COURSE CODE: R0173
  THEORETICAL TRAINING HOURS: 0,5 days..
  PRACTICAL TRAINING HOURS: 1,5 days.
  TOTAL DURATION HOURS: 2 days.
  NUMBER OF PARTICIPANTS: 4 people.
  PRICE PER PARTICIPANT: 1950€
  SPECIAL PRICING FOR WHOLE GROUPS

   

  UTC PITCH CYLINDER (Up Tower Correctives)

  1.950,00€ Add to basket